西安理工大学学报2019年第35卷第2期文献题录

 

[1] 王永泉，张广鹏，张倩. 基于模糊聚类的可重构制造工艺规划方法[J]. 西安理工大学学报, 2019, 35(2): 127-137.

   WANG Yongquan, ZHANG Guangpeng，ZHANG Qian. Process planning for reconfigurable manufacturing based on fuzzy clustering[J]. Journal of Xi’an University of Technology, 2019, 35(2): 127-137.

[2] 李雨，杨维明，黄秋安，李伟恒，李喜飞，张久俊. 多孔能源材料在有限扩散条件下的Warburg阻抗谱仿真研究[J]. 西安理工大学学报, 2019, 35(2): 138-146.

   LI Yu, YANG Weiming, HUANG Qiuan, LI Weiheng, LI Xifei, ZHANG Jiujun. Simulation of Warburg impedance spectra under finite diffusion boundary conditions for porous energy electrode materials[J]. Journal of Xi’an University of Technology, 2019, 35(2): 138-146.

[3] 宋卫章，杜晓斌，贺瑾，李希，张皓，王有云，钟彦儒. 双级矩阵变换器高抗扰性预测电流控制[J]. 西安理工大学学报, 2019, 35(2): 147-154, 171.

   SONG Weizhang, DU Xiaobin, HE Jin, LI Xi, ZHANG Hao, WANG Youyun, ZHONG Yanru. Predictive current control of two-stage matrix converter with strong disturbance resistibility[J]. Journal of Xi’an University of Technology, 2019, 35(2): 147-154, 171.

[4] 王闯，贾静，赵朗，卜越，贾嵘，彭宗仁. 特高压1100 kV GIS盆式绝缘子中心导体与绝缘盆体之间界面应力形成和作用过程讨论[J]. 西安理工大学学报, 2019, 35(2): 155-162.

   WANG Chuang, JIA Jing, ZHAO Lang, BU Yue, JIA Rong, PENG Zongren. Discussion on the formation and action process of interfacial stress between the center conductor and the insulation material of the UHV spacer used in 1100 kV GIS[J]. Journal of Xi’an University of Technology, 2019, 35(2): 155-162.

[5] 任利娟，张广鹏，王元，王妮娜，黄玉美. 基于压缩控制点的B样条曲线重构算法[J]. 西安理工大学学报, 2019, 35(2): 163-171.

   REN Lijuan, ZHANG Guangpeng, WANG Yuan, WANG Nina, HUANG Yumei. B-spline curve reconstruction algorithm based on compressed control points[J]. Journal of Xi’an University of Technology, 2019, 35(2): 163-171.

[6] 王建渊，赵娜，刘强，孙向东. 永磁同步电机电流预测控制鲁棒性研究[J]. 西安理工大学学报, 2019, 35(2): 172-178.

   WANG Jianyuan, ZHAO Na, LIU Qiang, SUN Xiangdong. Research on robustness of current predictive control for permanent magnet synchronous motor[J]. Journal of Xi’an University of Technology, 2019, 35(2): 172-178.

[7] 黄赓，李言，李龙，杨明顺，李嘉伟，陈鑫，崔莅沐. 45钢冷滚打成形Johnson-Cook本构模型参数标定及修正方法[J]. 西安理工大学学报, 2019, 35(2): 179-185, 199.

   HUANG Geng, LI Yan, LI Long, YANG Mingshun, LI Jiawei, CHEN Xin, CUI Limu. Parameter calibration and correction of Johnson-Cook constitutive model for 45 steel cold roll-beating [J]. Journal of Xi’an University of Technology, 2019, 35(2): 179-185, 199.

[8] 杨思雨，姜仁贵，解建仓，朱记伟，王娇. 泾河流域径流变化趋势及归因分析[J]. 西安理工大学学报, 2019, 35(2): 186-191.

   YANG Siyu, JIANG Rengui, XIE Jiancang, ZHU Jiwei, WANG Jiao. Trend and attribution analysis of runoff in Jinghe River[J]. Journal of Xi’an University of Technology, 2019, 35(2): 186-191.

[9] 高志远，郭宏超，王德法，梁刚. 高强度钢材钢框架梁柱节点抗震性能研究[J]. 西安理工大学学报, 2019, 35(2): 192-199.

   GAO Zhiyuan, GUO Hongchao, WANG Defa, LIANG Gang. Seismic behavior of high-strength steel-steel frame beam-column joints[J]. Journal of Xi’an University of Technology, 2019, 35(2): 192-199.

[10] 顾佳卫，解建仓，赵津，连亚妮，李少轩，陈晨. 四类非传统水资源开发工艺的可视化及可利用量计算[J]. 西安理工大学学报, 2019, 35(2): 200-211.

   GU Jiawei, XIE Jiancang, ZHAO Jin, LIAN Yani, LI Shaoxuan, CHEN Chen. Visualization of four types of unconventional water resources exploitation processes and available amount calculation[J]. Journal of Xi’an University of Technology, 2019, 35(2): 200-211.

[11] 田舒平，解瑞东，李涤尘，张安峰，张连重，高峰. 激光金属成形缺陷在线检测方法及热场仿真[J]. 西安理工大学学报, 2019, 35(2): 212-218.

   TIAN Shuping, XIE Ruidong, LI Dichen, ZHANG Anfeng, ZHANG Lianzhong, GAO Feng. A defects detection method for laser metal deposition and thermal fields simulation[J]. Journal of Xi’an University of Technology, 2019, 35(2): 212-218.

[12] 杨学成，赵恒，王希. LED光源气溶胶探测雷达光学准直结构优化设计[J]. 西安理工大学学报, 2019, 35(2): 219-223, 241.

   YANG Xuecheng, ZHAO Heng, WANG Xi. Optimization design of optical collimation structure for LED light source aerosol detection radar[J]. Journal of Xi’an University of Technology, 2019, 35(2): 219-223, 241.

[13] 于淼淼，郑元林，廖开阳，唐梽森. 基于视觉感知高度相关的图像质量评价[J]. 西安理工大学学报, 2019, 35(2): 224-233.

   YU Miaomiao, ZHENG Yuanlin, LIAO Kaiyang, TANG Zhisen. Image quality evaluation based on high correlation of visual perception[J]. Journal of Xi’an University of Technology, 2019, 35(2): 224-233.

[14] 邹蕊月，郭军林，李英民，袁康，白宏思. 两种村镇隔震结构动力特性强震演变规律的振动台试验对比研究[J]. 西安理工大学学报, 2019, 35(2): 234-241.

   ZOU Ruiyue, GUO Junlin, LI Yingmin, YUAN Kang, BAI Hongsi. Shaking table test comparative study on the evolution law of dynamic characteristics in strong earthquake for two kinds of rural isolation structure[J]. Journal of Xi’an University of Technology, 2019, 35(2): 234-241.

[15] 石鹏兵，张建丰，李涛，申亚宾. 遮荫对冬小麦生长及形态建模的影响[J]. 西安理工大学学报, 2019, 35(2): 242-247.

   SHI Pengbing, ZHANG Jianfeng, LI Tao, SHEN Yabin. Effect of shading on the growth morphology of winter wheat[J]. Journal of Xi’an University of Technology, 2019, 35(2): 242-247.

[16] 华凯，范留明，车军鹏. 地震波入射角对地震动特性的影响研究[J]. 西安理工大学学报, 2019, 35(2): 248-255.

   HUA Kai, FAN Liuming, CHE Junpeng. Characteristics of earthquake ground motion influenced by seismic incident angle[J]. Journal of Xi’an University of Technology, 2019, 35(2): 248-255.

[17] 朱训国，王兆毅，何传琪，王利芬，赵双，刘星池. 低强度钢渣混凝土抗压及抗渗性能试验研究[J]. 西安理工大学学报, 2019, 35(2): 256-263.

   ZHU Xunguo, WANG Zhaoyi, HE Chuanqi, WANG Lifen, ZHAO Shuang, LIU Xingchi. Experimental study on compressive strength and impermeability of low strength slag concrete[J]. Journal of Xi’an University of Technology, 2019, 35(2): 256-263.

[18] 王宇佳，杨静. 基于图像非刚性匹配的物体空间转角检测方法[J]. 西安理工大学学报, 2019, 35(2): 264-268.

   WANG Yujia, YANG Jing. Object space rotation angle detection method based on image non-rigid matching[J]. Journal of Xi’an University of Technology, 2019, 35(2): 264-268.